Nail separation reasons

 

We often heard of some complains that their manicure is easy to warping and separation, which is really annoyed. Today Our Lash will talk about some of the most common issues to look out for when you do nail cosmetology.

 

Common reasons of manicure tip warping:

1) If the edge of the nail is not done well, the fingertip will easily fall off after several times of opening the can or peeling oranges.

2) The nail itself is thin and soft, after contact with water it’ll be softer while the glue is hard, so the toughness is not enough, when the nail is bent, the nail polish glue will split from the middle part of the bend, thus falling.

3) The glue is too thick, the inside is not dry, and the adhesion to the nail is not enough;

4) There is no match between glue and glue, especially when soft glue meets hard glue, the front end is easy to fall off; Hard glue can be understood as the glue with insufficient toughness, and soft glue on the contrary.

 

Common reasons for unwarping of the back end of the manicure:

 

1) There’re dusts or grease on the surface of the nail, easy to make the subsequent glue and nail surface separated;

 

2) The polish of natural nail is not enough, just casually polish the nail surface but ignore the surface around, may not have enough adsorption force for the subsequent glue;

3) The glue applied to the skin will be separated from the skin, easy to lead to warping;

 

Common causes of bottom glue drop:

1) Engraving grinding is not enough, some places are not polished, and resulting in the glue and nail cannot fully fit;

2) The cleaning is not enough, there is grease, moisture or impurities on the nail surface will lead to nail oil glue cannot fit the nail, there will be shrinkage glue falling;

3) Not apply nail polish on edges or painted beyond nails;

4) Light time is not enough, the standard light time is LED light 60 seconds, UV light 120 seconds, but the nature of the product is different, for reference only!

 

Common causes of nail polish glue (whole piece) dropping:

1) There are impurities on the bottom glue;

2) The bottom glue is not dry; The coating is too thick, which leads to the light when it is not dry, or the thickness of the coating is uneven, and some places are dry and some places are not;

3) The bottom glue used is different from the nail polish glue brand, resulting in rejection;

4) No edges or painted beyond nails.

 

This is Our Lash, if you need eyelash extensions wholesale or have questions about lashes, please contact with us.