How to choose eyelash adhesive for eyelash artists

 

There’re various kinds of eyelash adhesive for grafting eyelashes, so the choice of a proper glue also became a headaches problem for eyelash artists, often heard someone say, how don't the glue stick, why the glue dry so slowly, why the lashes fall off the next after grafting… and so on. In fact all of these problems might be relative to the choice of eyelash glue.

If you are a novice, when you find a particularly good evaluation glue with a second to dry, you buy it but when using you found that it cannot stick well, you may thought that there is a problem with the glue, but in fact, because this glue dry too fast, grafting has passed the best adhesion time.

Therefore, the choice of glue and our own grafting speed is proportional.

 

1.    The type of glue

2.     

When we choose glue, the main consideration is the safety of glue, smell, efficacy and its fastness and durability.

There are usually two types:

1) Quick dry type: to distinguish the glue solidification speed, in contrast, the faster the glue dries, the stimulus will be more obvious

1-1.5 second quick dry: fresh texture, low viscosity, dry fast, suitable for high grade lash artists and skilled lash artists.

2-3 seconds quick drying: fresh texture, fast drying, slight taste and slight stimulation, suitable for beginners and skilled users of lash artists.

3-5 seconds quick drying: small stimulation, tasteless without stimulation, suitable for self-grafting, beginners and skilled lash artists.

2) Tasteless glue: the eyes are more sensitive and allergic constitution, or the use of grafting eyelashes (open eye grafting), but the time will be relatively short, generally about two weeks.

 

2. The use of glue (sky glue wholesale)

 

Step 1: Wake the glue

Each time the glue is used, it is necessary to hold the bottle with the right hand in the left side of the thenar position and collision 80-100 times, so that the glue is fully fused, do not use the first 2 drops of the newly opened glue.

Step 2: Drop glue

It is recommended to use glue stickers and drop glue vertically. It is recommended to change them frequently with fewer drops. It is recommended to change them every 15-20 minutes and replace the glue stickers together.Glue delay cup can also be used to extend the use time of glue, avoid repeated gluing, save glue.

Step 3: Wipe

After the glue is used up, hold the bottle body on the workbench gently down for a few times, so that the glue in the bottle body flow back to the bottle body, and then wipe the residual glue in the bottle mouth clean, squeeze out the excess air, and use the special cotton pad to wipe the bottle mouth, tighten the bottle cap and desiccant together into a sealed box in a cool and dry place to preserve.

Usually after using the glue, the bottle mouth will have a certain amount of residue, the accumulation over time will plug the bottle mouth, or the residual glue will solidified the bottle cap, will reduce the sealing effect to a certain extent, reduce the service life of the glue, so each time after the use of wiping work should not be less.

Step 4: Take glue

Our Lash recommended that the amount of glue taken from a single root for grafting should be at 1/3 or no more than 1/3.

 

3.    Glue storage

 

Many lash artists are in such pain, a bottle of glue did not grafting a few customers cannot be used, but also to buy new is very wasteful, this is because of improper storage, glue is susceptible to humidity and temperature two factors, so in storage, to control these two factors.

The most suitable storage temperature is 10-25℃, humidity is below 30%. The glue should be stored with the desiccant in a cool, dry place or sealed jar. This storage can extend the effective life of the glue.